|
|
 |
|
Thermoformed as
one piece with rounded corners from
break and scratch-resistant PETG
plastic, this wall magazine rack stands up to
abuse common in active environments.
This visually clear product compares
favorably to the clarity of optical
glass.
Our
varied selection gives you a choice of
displaying from one to twelve magazines
or flyers.
.
Unlike other mass produced, snap in place
magazine holder, these thermoformed one-piece racks are
constructed with PETG plastic with superior quality in form, fit, and
function . The front panel is bonded in place with UV adhesive and
ultraviolet light for a strong and clean attachment. Corners and edges
have an attractive radius which also helps prevent injuries as there's
no sharp edges to impact.
The full-sized front cover keeps the content of each pocket from sliding
out the bottom. Plus, keep these literature holders looking clean and smart using
standard commercial cleaning agents, since the PETG plastic resists
damage from solutions of mineral acids, bases, salts, soaps, and is also
resistant to alcohols, hydrocarbons, and a variety of other oils. Deluxe magazine pockets measure 9"w x 11-7/8"h x 1-3/4"d. That
means you can slip up to 1-3/4" of literature in each pocket. A small opening at the bottom of each rack's pockets
help provide easy cleaning. |
|
|
|
|
View All:
Literature Holders
|
Search this
Category
|
|
|
|
|
|
|
|
|
|
Item # 11-5602CL
|
Deluxe 12-Pocket Holder
By adding the deluxe magazine rack line of
products to your office decor, you receive the ultimate in value-added
durability and resistance to breakage, thus minimizing safety and
liability concerns associated with broken displays and reducing
opportunity for in-transit damage.
Are you needing a high quality, long lasting
display for your brochure pamphlet material? Please
check our wall mounted
deluxe brochure
displays in styles that let you display 2, 3, 6, 8, 12, or 24
brochures .
Our deluxe line also includes
combination
magazines and brochure wall displays.
Unlike other acrylics, PETG is so clear, it compares
to optical glass in appearance, and it has a greater impact
resistance than typical acrylic materials. In addition it can
withstand broader temperature swings as well. Cleaning is easy
because the surface is resistant to soaps, salts, mineral acids,
alcohols, and numerous oils.
|
|
|
|
|
 |
Break resistant,
thermaformed PETG material and quality construction. |
|
|
Upscale, attractive design
keeps magazines and flyers organized. |
|
|
Horizontal and vertical
models. |
|
|
Models available with one to
twelve pockets. |
|
|
Some models may be mounted on
optional floor stand. |
|
|
|
Use
these optional floor display stands to showcase
your magazines or flyers. Weighing only 11 lbs, take these
stands to meetings, conferences, set them in your lobby, office,
or elsewhere. Also perfect when your wall space is limited. Some
assembly required.
You can attach the following models to this floor stand:
-
11-5603CL
-
11-5607CL
|
|
Item
# 11-5619BL
Optional Magazine Floor Stand |
|
|
|
One problem
often encountered when displaying magazines in magazine
holder pockets is that the
unsupported pages curl over. Improve the appearance of your display whether on a wall or a stand with this optional and
innovative page support that was the victor at the
DESIGN PLUS
2001Premiere Paperworld.
|
|
|
|
|
 |
|
Item # 11-5660WH |
|
|
Ensure your
magazines remain visible and present an attractive and clear
public appearance. Our optional Straighten Ups prevent
page curl when inserted at the same time as your literature is
displayed. Existing curled literature cannot be corrected by it, however, so
it's important to insert these 8.5"w x 10.5"h supports when
you load the pockets. For use in
magazine-sized pockets only. Not for use
with smaller pamphlet-sized pockets. Six inserts
per package. |
|
|
|
|
|
|
 |
For Literature Display
mounting instructions
in PDF format: click here
For Literature Floor Stand
installation
instructions in PDF format:
click here |
 |
|
|
back to top |
|
|
Unit prices include UPS
ground transportation
within the contiguous
U.S. unless this symbol
appears:
(please contact our
customer service
department at
1-800-888-6024 for
shipping quotes) |
 |
|
|
Description |
Dimensions |
Model # |
Prices US$ |
|
|
1 pocket holder |
11.13" W x 12.25"
H x
2" D |
11-5621CL |
$41.95 |
 |
|
2 pocket holders,
horizontal |
21"
W x 12.25"
H x 2"
D |
11-5622CL |
$85.95 |
|
|
3 pocket holders,
horizontal |
30.75"
W 12.5"
H x
2" D |
11-5624CL |
$118.95 |
|
|
3 pocket holders, vertical |
11.13"
W x 36.75"
H x 2"
D |
11-5613CL |
$126.95 |
|
|
4 pocket holders, squared |
20.5"
W x 24.63"
H x
2"
D |
11-5620CL |
$136.95 |
|
|
6 pocket holders, horizontal |
30"
W x 24.63"
H x 2"
D |
11-5607CL |
$150.95 |
|
|
6 pocket holders, vertical |
21"
W x 36.75"
H x 2"
D |
11-5617CL |
$149.95 |
|
|
8 pocket holders, vertical |
21"
W x 49"
H x 2"
D |
11-5615CL |
$190.95 |
|
|
9 pocket holders, squared |
30"
W x 36.88"
H x 2"
D |
11-5603CL |
$200.95 |
|
|
12 pocket holders, vertical |
30"
W x 49"
H x 2"
D |
11-5602CL |
$224.95 |
|
|
12 pocket holders, horizontal |
60"
W x 24.5"
H x 2"
D |
11-5614CL |
$236.95 |
|
|
floor display stand, 11 lbs.,
optional; for use with 11-5603CL and 11-5607CL. |
30"
W x 53"
H x 19.5"
D |
11-5619BL |
$137.95 |
|
|
Straighten up page support -
for magazine-sized pockets; 6 per pkg. |
8.5"
W x 10.5"
H x 1/4"
D |
11-5660WH |
$21.95 |
|
|
|
|
|
<
back to top
>
© Copyright 2000 to 2009 ~ Ergo In Demand, Inc. ~ 4900 Industry Drive, Central Point, OR 97502 |
|
|
|
Deluxe Magazine Holder
