VESA Wall Mount - Lockable LCD Arm with Convenient Pivot Handle

Maneuverable VESA wall mount. Versatile flat panel mount provides you a brawny solution for high intensity LCD wall mount usage. The quality design allows you to mount this 30"L steel arm so it will accommodate both stand-up or sit-down viewing easily as well as smooth side-to-side placement from the wall, the pivot bracket or at the point where the monitor connects to the arm. This arm includes two mounting brackets for both VESA mounting hole patterns of 75 x 75mm (3"x3") or 100 by 100mm (4"x4") so you can get your LCD mounted without unnecessary delay.

Handle provides a lockable LCD arm that can handle heavier monitors. This arm is designed to easily balance and lock LCDs  that weigh 5 lbs to 15 lbs into a neutral position. However, its steel construction can also manage monitors weighing from 16 lbs to 40 lbs (without their base). These heavier weight monitors simply require that you maintain manual control of your arm-mounted monitor whenever they are being unlocked and re-positioned and then locked into its new position. Locking is easily accomplished by pushing the large stirrup-grip handle into its lock mode.

Spring balanced arm with weight capacity, when locked, of up to 40 lbs; Weight capacity in neutral balance is 5 to 15 lbs. This means mounted monitors weighing between 16 and 40 lbs must be manually supported when they're not in the locked position. Wall mount arm complete with wall bracket, pivot bracket, and VESA plate hole mount and adapter for 75 x 75 (3"x3") or 100 x 100 (4"x4") mounting patterns. No other hardware included Range of motion: 45° up to 45° down at wall and also at site of monitor mounting. Total maximum left to right potential of 180° (limited by monitor size; up to 90° left or right) Arm Length: 30"L When positioned back against a wall, monitor will sit approximately 6" from wall; when extended full forward, monitor connection is 35-1/2" off wall Sturdy steel wall plate is 8-1/2"h x 3-1/2"w Open, inside of large handle measures approximately 8-3/4"h x 4-3/4"w; approximate exterior width measurement is 5-1/2"w Arm constructed of sturdy steel with the grey or black accent areas made of solid plastic. The grey or black plastic accents provide a choice of colors for decor and also provide a more rounded appearance Colors: Light Grey or Black One year limited warranty protects against defects in material or workmanship

 

View All: Flat Panel Mounts CONSUL	Search this Category

Click for larger view

Item # 03-MON2720

Place Your Order Quantity Product Color Select Color Black Grey Price

Wall Mount Sel Att 1 Sel Att 2

Related Products:

ceiling mount on pole Consul	dual monitor mount	dual monitors ceiling mount on pole	mounts for multiple monitors	LCD ceiling mount	LCD wall mount

Range of motion for this LCD VESA wall mount. The powerful steel wall plate measures 8-1/2"h x 3-1/2"w and is built to ensure sturdy hold for long-term use. 

This arm will tilt 45° up to 45° down at the wall connection for ease of viewing at different working heights, whether standing or sitting. A pivot bracket connects to the end of the arm and that pivot bracket is then connected to a mounted plate with four screw holes for attachment to the LCD itself. The pivot bracket allows a 180° (90° left and 90° right) monitor rotation, as shown in photo at left.

The VESA mounting plate also allows additional monitor maneuverability of 45° up and 45° down. Working efficiency and ergonomic comfort are easily managed by this functional arm.

When the 30" arm is extended outwards, the overall distance from the monitor connection to the wall is approximately 35-1/2". When the arm is positioned so the stirrup handle touches the wall, the hardware extends approximately 6" off the wall (plus monitor depth).

Shown below, lockable LCD arm designed with a large stirrup-shaped handle on rear that is also the method of locking monitors weighing more than 15 lbs into position.

Control your lockable LCD arm with the large steel handle. This VESA wall mount arm includes a  stirrup shaped steel handle that is designed to provide a sturdy grip that's easily accessed. This handle is essential to the locking mechanism, also. This flat panel arm is designed to balance and automatically lock monitors into position when they weigh within the range of 5 lbs to 15 lbs. When the user releases their grip, the arm "assumes" that is the desired placement and snaps into lock mode.

Moving and locking LCDs weighing between 16 lbs to 40 lbs total When you are initially mounting or when you're planning to reposition an existing flat panel weighting between 16 lbs and 40 lbs, you must maintain a hold on the handle until it is again locked in place by manually pushing back on the handle. Releasing these heavier units before the lock snaps into place will result in the arm and monitor falling unimpeded. To avoid damage, control the placement and locking of your equipment.

These rugged arms provide professionals with dependable and convenient service. Available in black or light grey.

• Does my flat panel have a 75 x 75mm or 100 x 100 mm VESA Standard hole pattern - yes or no? Check our VESA reference chart if you're not certain.

• What is its weight without the stand (the stand is also called base or footprint)? If you are not sure of the weight, please check out the reference chart for that additional information, also.

Additional VESA information: To find out more about these industry mounting standards, go to About Vesa Standard.

PDF Files (Acrobat Reader):

To view installation assembly in PDF format: click here

To view lock function in PDF format: click here

For technical specs on the wall bracket: click here

back to top

03-MON2720.LG

03-MON2720.BK