Projector
rests on a tray, which can be adjusted
around it for a secure fit.
Image registration
is easily handled because the tray fittings
are not fixed.
You
will enjoy a range of motion, including
Roll (+/-5°), Pitch (+/- 90° degrees,
and a 360° Yaw (swivel).
|
A
universal solution for ceiling mounting
upright LCD/DLP, boasting compact design
and simpler installation. Your order
nets you the adjustable steel mount.
The smallest
model - Item #25-LCDA215-C - allows
you to make overall height adjustment
between 3.32"h to 4.40"h, so the lowest
height projection equipment can be slipped
between the tray and bottom of the raised
bar. Plus, this unit's width can be
closed down from its widest point of
7.64"w to a tighter 4.40"w. Tray depth
is fixed at 8"d.
Consider these four units for slightly
larger projector models:
The
# 25-LCDA220-C
has an overall height adjustment range
between 7.7"h to 13.40"h with a width
range between 8.62"w to 11.50"w x 17.75"d.
The difference
between the 220 model and this Item
# 25-LCDA230-C
is the adjustable width, which can accommodate
projector sizes ranging from 12.7"w
to 23.25"w. The height and depth ( 7.7"h
to 13.40"h x 17.75"d) is the same.
The
# 25-LCDA225-C
offers you overall dimensions of 10.80"h
to 16.0"h x 8.62"w to 11.0"w x 17.75"d.
The deepest
tray in this series is Item
# 25-LCDA240-C
and measures 10.80"h to 16.50"h x 14.10"w
to 19.60"w 22.25"d overall. The actual
width of this tray is 12-1/2"w and it
is fixed width, rather than adjusting.
The width adjustment range noted is
for the side panels only.
|
