Two articulating pole
arms offer you a choice of single-link or two-link
extension. If you're
looking for maximized adjustability when pole mounting
your LCD computer screen, the single link arm and the
double link arms offered here can be your solution. Both
incorporate Centris™ Technology to secure monitors
weighing between 5 lbs to 25 lbs.; both incorporate a
gas pneumatic cylinder for height adjustability; both
have extended arms with pivot joints enabling side to
side swivel, and both allow portrait/landscape rotation.
Tension adjustment and
solutions for non-VESA standard monitors, plus several
optional accessories create situations almost as good as
offering customized mounts.
These LCD pole mounts accommodate screens with the VESA
standard 75mm x 75mm or 100mm x 100mm mounting pattern.
However, interface brackets are available for non-VESA
compliant monitors and customer service will be happy to
assist you. Independent tension adjustment allows
control so customized you can even optimize it for Touch
Screen use. Accessories such as the Extreme Tilt bracket
provides even greater monitor tilt (as much as 90° up
and 30° down, depending on monitor), while the optional
Quick Release Bracket and the Security Hardware Kit
present solutions to specific issues.
Single or Double link
pole mounting arms of heavy duty steel clamp onto
poles of 1-1/2" up to 2" diameter.
Centris technology
self adjusts to securely hold monitors weighing from
5 lbs to 25 lbs; provides effortless tilt and pivot
function, fingertip tilt and swivel control for
viewing at any angle.
Accommodates standard
VESA® compliant monitors (75 mm / 100 mm). There's a
VESA 100x200mm adapter also available or an
interface plate is also available for non-VESA®
compliant monitors, upon request.
Single link arm has
pivot of 360° at the pole (180 left and 180 right),
left to right pivot at the display of up to 180°
(90° left and right), and pivot of up to 360° at the
arm (180° left and right). Note: Size of monitor can
affect pivot range.
Independently
adjustable tension at pivot point for customized
control. Tension can be optimized for Touch Screen
use
Height can be
adjusted two ways. Pneumatic arm allows lift and
lowering. Also comfortable pole placement height can
be adjusting by loosening and tightening of a single
screw at pole connection (maintain hold of monitor
arm to prevent droppage).
Lengths: Single-link
of 13-1/2"L; Dual link of 20"L.
Colors available:
silver metallic or smooth black - powder coat.
Optional: Extreme
Tilt/Pivot Bracket allows adjustment approximately
90° up and 30° down depending on monitor size.
Optional: Quick
Release
mechanism
Optional: Security
Hardware Kit
Manufacturer limited
warranty protects arm from defects in material and
workmanship for 10 years; gas pneumatic system is
covered by a limited five year warranty.
Lengths of monitor pole
arms. The single link
arm has an overall 13-1/2" extension and an overall arm
height adjustment range of 13-1/4". When folded back to
the closed position, the depth is 1.19".
The two link pole mount
offers a maximum arm extension up to 20"L and a 13-3/4"
height adjustability. The arm's depth when shifted back
into its closed position 2-3/16"d off the pole.
Set these height adjustable
arms at the preferred position for your work along a
vertical pole with diameters between 1-1/2" to 2" dia.
Poles are not included with your order due to the wide
variety of height and placements required by different
environments, also because so many pole mount areas have
existing poles in place.
Optional accessories are available that help create more
customized mounts. There are three
accessories offered below that provide functional
answers to specific requirements of many users.
Extreme Tilt mechanism.
Increase the viewing range of motion by adding this
extreme tilt mechanism to your order. It provides a
fixed axis on the mount and allows your LCD to pivot
approximately 90 degrees upward and 30 degrees downward
on its axis, depending upon the size of the LCD monitor.
It can be added to the 10" single-link or 16" two-link
extensions. This mechanism is compliant with VESA
standard 75mm x 75mm and with the 100mm x 100/mm.
Available in colors Silver of Black.
Do you already own the
10" or 16" arm Astra pole mount?
If you want to
retrofit your existing Astra pole mount for increased
tilt, just place a separate order for as many of these
brackets as you need. One tilt mechanism per monitor
joint connection.
Does your work
environment require quick removal and change out of
monitors in seconds, without the use of unwieldy tools?
Hospitals and financial trading firms are just two
examples of critical business functions that depend on
reliable, fast information. Malfunctioning monitors
simply can't be tolerated in these and other locations.
Ordering this optional Quick Release bracket (shown at
left) allows quick removal and change-out in seconds,
without tools. Flipping the latching flag on this
bracket allows enables removal and replacement in
seconds. Each Quick Release handles a single monitor.
If monitor security is also
an issue in your working environment, please note that
additional in-house security measures may be required
after installation of quick release mechanisms to
safeguard monitors; that's because this quick release
allows anyone to easily remove equipment. Available in
colors Black or Silver.
Optional Security
Hardware Kit.Making equipment removal
more difficult can deter opportunity for theft. If your
monitor is not intended or needed to be removed and you
desire increased monitor security, using this optional
kit (photo at right) can help deter monitor theft. The
security hardware components enclosed allow you a
variety of security hardware from which to choose that
replaces most exposed standard hardware on LCD panel
mounts.
