|
|
 |
|
Your monitors are mounted along three curved, horizontal
bars with VESA compatible mounting plates. Each of your
monitors are afforded smooth 15° tilt adjustment with finger
tip control as well as portrait/landscape positioning of
the monitor for convenient viewing of different documents.
A multiple monitor arm is the right solution where fast
and simultaneous information is essential to success or
health.
Setting these flat panel
displays on a pole on a grommet mount drilled through the
desk surface provides you the strong base of support needed
to display your monitors securely. This pole mount desk
system includes a slot through the top of the grommet mount
for orderly wire management; use it effectively by mounting
your system to accommodate wire management.
|
|
| |
 |
|
|
Supports eight monitors
on three horizontal bars. Bar for two monitors holds
two 20" standard LCDs, weighing up to 16-1/2 lbs
each. Two bars for three monitors support three
standard 19" monitors, each can weigh up to 10 lbs
|
|
|
VESA standard ( 3"x3"
and 4"x4"); a VESA 100x200mm adapter and interface
brackets are available for non-VESA® compliant monitors,
upon request
|
|
|
Portrait/landscape rotation;
smooth tilt adjustment 15º up and down is adjustable
by finger tip
|
|
|
Pole grommet mounts
to desk and provides three curved horizontal bar
arrays for positioning eight LCD computer monitors
|
|
|
Pole height 42"
|
|
|
Constructed of heavy duty steel
|
|
|
Colors available: silver
or black
|
|
|
All installation hardware
included; pre-assembled components for a fast installation
|
|
|
Optional Quick Release
mechanism
|
|
|
Limited warranty: Arm
is free of defects in material and workmanship for
ten years
|
|
|
|
|
|
|
|
|
|
View All:
LCD Pole Mount
|
Search this
Category
|
|
Available in Black and Silver
|
|
|
Move your
LCD along the curved horizontal bars and set them in the
preferred position, based on their size and your viewing
requirements. Allow sufficient room so your monitors are
able to be adjusted when needed. This system of LCD arms
allows as much as 15 degrees tilt with fingertip control.
Curvature of bars increases viewing ease. Portrait/landscape
rotation also available. Available in black or silver.
|
|
Photo above shows a sample
horizontal bar with monitor
mounting mechanism
|
|
|
|
|
Grommet mounting
your multiple monitor mount requires an existing hole or
drilling a hole through the desk surface. All grommet mount
hardware is included with easy installation instructions.
|
|
|
Cable
management system.
Grommet desk mounting
requires at least a 1/2" hole through the desk surface.
If cable management is to be used, a larger hole through
the desk is necessary, but this will allow you to route
the cables through a cable access slot in the top grommet.
Keep your desk free of a wire tangles with this easy cable
management system.
|
|
|
|
The mounting
plates that come standard with these LCD arms are designed
with a hole pattern that accommodates both the 3"x3" or
4"x4" LCD mounting standard. In case you are not sure
if your LCD is built to this VESA standard, please go to
VESA monitor mount reference
charts where you will find major LCD manufacturers and
their products listed.
A VESA 100x200mm adapter and interface brackets are available
for non-VESA compliant monitors, upon request.
|
|
|
A
quick flip of the hinge mechanism allows removal of your
monitor in seconds, without the use of tools. This quick
release comes with an FSB interface bracket (not shown)
to attach to any monitor with VESA 75mm/100mm mounting pattern.
Quick releases must be ordered separately per the number
of monitors to which it will be attaching.
The quick release is available
in silver or black to match the color of you LCD arm. Color
must be specified when ordering.
|
|
|
The photos
below offer a glimpse of just some additional options using
this same elevated pole system. You can
contact us with your
questions. Customer Service will be happy to assist you.
|
|
|
|
|
|
|
Dual Grommet Arm,
horizontal Item #25-KTG-220
(27" array, 24"w monitors) or item #25-KTG-225 (34"
array, 30"w monitors; 30 lbs each monitor)
|
Quad Grommet Arm
Item #25-KTG-440 (27" array, 24"w monitors) or item
#25-KTG-445 (34" array, 30"w monitors; 20 lbs each monitor)
|
Hex Grommet Arm
Item
#25-KTG-330 (6 monitors, 19" wide, up to 16-1/2 lbs each)
|
8 Grommet Arm
Item
#25-KTP-3X3X2G
(2 monitors on 24" array, up
to 24" wide each, and 2 rows of 19" wide monitors, up to
12-1/2 lbs. each monitor)
|
|
|
View
assembly instructions
in PDF format:
click here
|
|
|
-
Has my LCD monitor VESA
Standard hole patterns on the back of the monitor -
yes or no? (VESA means a hole pattern of either 3x3"
or 4x4")
-
How many monitors do I need
to mount?
-
Weight of each monitor without
the stand (the stand is also called base or footprint)?
If you are not sure of the weight, please check out
the cross reference
chart for additional information.
-
Color preference: silver
or black?
|
|
back to top
|
|
Unit prices include
UPS ground transportation within the contiguous
U.S.
|
|
|
|
Description
|
Model #
|
Prices US$
|
black
|
silver |
| Pole mount for
8 LCDs; mounts to desk with grommet. |
25-KTP-3X3X2GB
25-KTP-3X3X2GS
|
$689.95 |
 |
 |
| Optional Quick
Release, (fits VESA 3" and 4") for one monitor (available
in black or silver) |
25-KSA-1007 |
$29.95 |
|
|
< back to top
>
© Copyright 2000 to 2008 ~ Ergo In Demand, Inc. ~ 4900 Industry Drive, Central Point, OR 97502 |
|
|
